The Innohome Stove Alarm SA101 provides reliable fire protection for the area of your home that is most at risk of fire. Simple to install, the Stove Alarm attaches to the cooker hood using integrated magnets, or can be fitted to the wall using screws without the need for cables or an external power source.
Specially designed for installation above your cooker, the Innohome Stove Alarm SA101 provides reliable fire protection for the area of your home that is most at risk of fire. Simple to install, the Stove Alarm attaches to the cooker hood using integrated magnets, or can be fitted to the wall using screws without the need for cables or an external power source. The loud 90dB alarm is activated if the cooker becomes too hot or when an empty hotplate is left on, warning of a hazardous situation before toxic gases are produced or a fire starts.
This is the technical data for the Innohome Stove Alarm - SA101.
|Alternative Product Codes||SA101, 101|
|Power Type||Battery powered|
|Battery Life||5 years|
|Alarm Condition||90dB audible alarm|
|Construction||Housing: Halogen free fire rated plastic|
The following datasheets are available for this product.
Q. Can anyone install the Innohome Stove Alarm?
A. The Innohome Stove Alarm is a battery powered detector that requires no wiring whatsoever. Its user friendly design allows for any competent person to carry out the installation.
The Innohome Stove Guard has a control unit that needs to be connected to the cookers electricity supply. It is recommended that the Stove Guard is installed by a qualified electrician.
Q. What's the difference between the Innohome Stove Alarm and the Stove Guard?
A. The Innohome Stove Alarm is an intelligent heat sensor that monitors the cooker top temperature and its rate of rise. The sensor sounds an alarm when the temperature exceeds safe levels, providing an alert for you to switch off the cooker as soon as possible.
The Innohome Stove Guard is made up of two parts - a heat sensor and a control unit. The heat sensor works in the same way as the Stove Alarm; however it has built-in wireless capability that sends a signal to the control unit which is connected to the cookers electricity supply. When triggered, the control unit cuts off the power to the cooker, effectively preventing a fire from igniting.
Q. How does the Innohome alarm recognise the difference between when I'm cooking and a hazard happening?
A. When first installed, the Innohome alarm needs to adjust to the installation environment and the users' cooking styles. If the sensor sounds during a normal cooking situation, press the reset button on the sensor during the pre-alarm signal. This will enable the sensor to reduce its sensitivity and learn that the situation was not hazardous.
Q. I don't have a hood above my cooker. How can I install the Innohome alarm?
A. Both the Innohome Stove Alarm and Stove Guard feature integrated magnets which allow for the sensors to be fitted to the cooker hood. In cases where there is no cooker hood, the sensors can be fitted to the wall using screws. Installation instructions are supplied with each unit.
4 customers have rated this product and it has an overall rating of 4.5 out of 5
Reviewed by: AB
Seems to work fine once initially set up.
Published on: 22nd December 2017
Reviewed by: -
Simple install but instructions seemed just a bit confusing Hardly your fault but only when heat is deliberately turned up can one see/hear what the alarm sounds like. Like fire extinguishers - only when they are used can you appreciate how they work !!
Published on: 3rd June 2015